关于课程

该课程供罐式集装箱行业的专业人员，特别是罐箱技术人员和堆场维护人员使用，常用于堆场对于罐东进场箱子一般维修估价或者是退租修理的参考标准，极为行业实用和权威性。课程包含：

罐箱可接受使用条件
行业术语
行业规则
箱主要求
修理说明
风险评估
健康安全等等

资料为英文原版，后期会做相应中文翻译。

Course Content

INTRODUCTION

Definitions
Terminology
Cleaning Terminology

1. Cleanliness

2. Frame

3. Paintwork
NOT Acceptable Condition ▪ Paint failure ▪ Contamination and damage by cargo ▪ Paint degradation greater than 8% Ri4* ▪ Improper repairs, parts, materials. Acceptable Condition ▪ Corrosion less than Ri4 ▪ Faded, discoloured ▪ Abrasions. Note: *This refers to ISO 4628 Part 3: Assessment of degree of rusting. See appendix. Protective paint systems break down over a period of time through exposure to atmosphere. ISO 4628 identifies degradation by categorizing in six conditions Ri0 to Ri5. Paint damage and corrosion should be repaired as part of routine maintenance. Repair paint colour should be the same as the original i.e. like for like.

4.Walkway and Ladder

5.Insulation and Cladding

6. Spillage Boxes and Compartments(Top and Bottom,With and Without Lids)

7. Man-way

8. Pressure Relief Device (Safety Valve)

9. Top Valves.

10.Tank Shell (Pressure Vessel) Interior and Exterior

11. Bottom Valves Assembly (Three Closures – Internal FootValve and Outlet Valve, Outlet Cap)

12. Heating

13. Marks (Markings)

14. Miscellaneous

15. Test

Appendix A Cleaning Documents
These documents are examples of the content to be included. The format of the document might vary by Company. Health & Safety legislation in the country of issue take precedence over these examples.

Appendix B. Mapping Chart

Appendix C. Seals and Gaskets

Appendix D. Paintwork (Percentage Corrosion)

Student Ratings & Reviews

No Review Yet

关于课程

What Will You Learn?

Course Content

INTRODUCTION

Definitions

Terminology

Cleaning Terminology

1. Cleanliness

1.1 Interior

1.2 Exterior

1.3 Foreign Marks

2. Frame

2.1 Corner posts

2.2 Top, Bottom, Side and End Rails, Ancillary Bracing and Parts Including Load Transfer Areas*

2.3 Corner Fittings (Corner Castings).

2.4 Tank (Vessel) Connection to Frame*

2.5 Stacking Supports (Mis-Stacking supports).

4.Walkway and Ladder

4.1 Walkway and Support Structure

4.2 Ladder

5.Insulation and Cladding

5.1 Insulation

5.2 Cladding

6. Spillage Boxes and Compartments(Top and Bottom,With and Without Lids)

Introduction

7. Man-way

7.1 Hinged Man-lid and Swing-bolt (Hand-nut) Assembly

7.1.2 Hinged Man-Lid Seal

7.2 Flanged Man-Lid (Bolted Man-lid)

7.2.1 Flanged, Bolted Man-Lid Seal or Gasket

7. 3 Calibration Chart & Depth Gauge (Dipstick)

8. Pressure Relief Device (Safety Valve)

8.1 Pressure Only Relief Device

8.2 Pressure and Vacuum Relief Device

8.3 Flame Protection – Relief Device

8.4 Rupture Disc (Bursting Disc, Frangible Disc) & Tell-tale Pressure Gauge

9. Top Valves.

9.1 Airline (Vapour) Valves

9.2 Top Outlet (Top Discharge Valve)

9.3 Top Valve Dip Pipe (Syphon Tube).

9.4 Ancillary Valves (Additional Top Valves if Fitted)

10.Tank Shell (Pressure Vessel) Interior and Exterior

10.1 Tank Shell

11. Bottom Valves Assembly (Three Closures – Internal FootValve and Outlet Valve, Outlet Cap)

11.1 Foot Valve

11.2 Outlet Valve (Butterfly or Ball Valve)

11.3 Outlet Cap (or Blank Flange)

11.4 Emergency Closure (Remote Trip Wire and Thermal Link).

12. Heating

12.1 Steam Heating

12.2 Electric Heating (Heating Cable, Elements and Glycol Systems)

12.3 Temperature Gauge

13. Marks (Markings)

13.1 Marks (Decals) Regulatory and Operational Marks

13.2 Data Plate(s)

14. Miscellaneous

14.1 Document Holder

14.2 Static electricity (Earth) Lug

15. Test

15.1 Air Leakage Test

15.2 Periodic Inspection and Test (2.5 Year Intermediate and 5 Year Test)

15.3 CSC Examination

Appendix A Cleaning Documents These documents are examples of the content to be included. The format of the document might vary by Company. Health & Safety legislation in the country of issue take precedence over these examples.

Cleaning Documents

Appendix B. Mapping Chart

Appendix B. Mapping Chart

Appendix C. Seals and Gaskets

Appendix C. Seals and Gaskets

Appendix D. Paintwork (Percentage Corrosion)

Appendix D. Paintwork (Percentage Corrosion)

Student Ratings & Reviews

Appendix A Cleaning Documents
These documents are examples of the content to be included. The format of the document might vary by Company. Health & Safety legislation in the country of issue take precedence over these examples.